STOPKiT® Temporary has been developed as an emergency repair to seal in few minutes various types of leak (oil, chemical, gaz, water...).
Several versions of STOPKiT® Temporary are available depending on the environment, pipe diameter and defect size.
STOPKiT® Temporary must be installed only by trained and certified applicators to ensure the effectiveness of the product. Contact us or 3X representative in your country for training certificate.
The box includes yellow belt(s), patch (50 x 100mm or 100 x 100mm), stainless steel bars & bolts
(the number of belts, stainless steel bars & bolts depends on STOPKiT diameter)
| Use | ONSHORE ENVIRONMENT - EMERGENCY REPAIR | |
| Pipe diameter | From 4’’ to 56’’ | |
| Pipe temperature | -20°C / +80°C (-4°F / + 176°F) | |
| Patch size | 50 x 100mm | 100 x 100mm |
| Maximum defect size | Ø≤ 10mm | Ø≤ 50mm |
| Maximum pressure | 80 bars / 1160 psi | 30 bars / 435 psi |
STOPKiT® Temporary Offshore has been designed specifically for offshore environment such as platforms or subsea conditions.
The belt of this model is not only lighter and more flexible but is also very resistant underwater. It will definitely improve the long-term product efficiency.
The box includes red belt(s), patch (50 x 100mm or 100 x 100mm), stainless steel bars & bolts
(the number of belts, stainless steel bars & bolts depends on STOPKiT diameter)
| Use | OFFSHORE ENVIRONMENT (TOPSIDE) / SUBSEA - EMERGENCY REPAIR | |
| Pipe diameter | From 4’’ to 56’’ | |
| Pipe temperature | +5°C / +80°C (+23°F / +176°F) | |
| Patch size | 50 x 100mm | 100 x 100mm |
| Maximum defect size | Ø≤ 10mm | Ø≤ 50mm |
| Maximum pressure | 80 bars / 1160 psi | 30 bars / 435 psi |
STOPKiT® packaging
1 Install the STOPKiT® close to the leak
2 Slide the STOPKiT® above the leak
3 Center, keep the rubber patch over the leak
4 Tight the anti-vibration nuts until 40N/m
